RA-SIFBD

Belt Drive Inline Fan

(RA-SIFBD)

Square housing, three discharge options. For many varieties of general ventilation ducting.

  • Air Volume: 1 – 29,000 cfm
  • Maximum SP: 5" wg. @ standard air density
Contact Sales Rep

Features

  1. Two full size access doors provide easy access to the wheel, shaft, and bearings
  2. Power Pack can be easily removed through access doors
  3. Wheels are backward inclined, non-overloading
  4. Variable pitch motor pulley allows for field adjustment and system balancing
  5. Thermal overload protection (single phase)
  6. Aluminum wheels
  7. Housing is galvanized steel construction
  8. Disconnect switch standard
  9. Side discharge options
  10. Units can be installed at a 90 degree rotation
  11. Unit can be installed horizontally & vertically
  12. Belt guard standard
  13. Motor cover standard
  14. Mounting brackets standard

Options

  1. Floor vibration isolators
  2. Ceiling vibration isolators
  3. Back draft dampers
  4. Motorized back draft dampers
  5. Discharge screen
  6. Square duct inline connectors
  7. Inlet rings for round duct
  8. Side discharge left
  9. Side discharge right

Certifications

RuppAir certifies that Models RA-SIF11BD thru RA-SIF36BD and Models RA-SIF15BDHP thru RA-SIF36BDHP are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and 311 and comply with the requirements of the AMCA Certified Rating Program.

Models RA-SIF11BD thru RA-SIF36BD and Models RA-SIF15BDHP thru RA-SIF36BDHP have been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models RA-SIF11BD thru RA-SIF36BD and Models RA-SIF15BDHP thru RA-SIF36BDHP are ETL Listed under report number 3100959CRT and comply with UL705 and CSA C22.2, No. 113 Standards.

Catalog #110R

April 2015

Resources

Models

  1. RA-SIF11BD Belt Drive Square Inline Fan with 11.75" Centrifugal Wheel.
  2. RA-SIF11BDHP HP Belt Drive Square Inline Fan with 11.75" Centrifugal Wheel.
  3. RA-SIF13BD Belt Drive Square Inline Fan with 13.75" Centrifugal Wheel.
  4. RA-SIF13BDHP HP Belt Drive Square Inline Fan with 13.75" Centrifugal Wheel.
  5. RA-SIF15BD Belt Drive Square Inline Fan with 15.75" Centrifugal Wheel.
  6. RA-SIF15BDHP Belt Drive Square Inline Fan with High Pressure 15.75" Centrifugal Wheel.
  7. RA-SIF18BD Belt Drive Square Inline Fan with 18.75" Centrifugal Wheel.
  8. RA-SIF18BDHP Belt Drive Square Inline Fan with High Pressure 18.75" Centrifugal Wheel.
  9. RA-SIF20BD Belt Drive Square Inline Fan with 20.75" Centrifugal Wheel.
  10. RA-SIF20BDHP Belt Drive Square Inline Fan with High Pressure 20.75" Centrifugal Wheel.
  11. RA-SIF24BD Belt Drive Square Inline Fan with 24.75" Centrifugal Wheel.
  12. RA-SIF24BDHP Belt Drive Square Inline Fan with High Pressure 24.75" Centrifugal Wheel.
  13. RA-SIF30BD Belt Drive Square Inline Fan with 30.875" Centrifugal Wheel.
  14. RA-SIF30BDHP Belt Drive Square Inline Fan with High Pressure 30.875" Centrifugal Wheel.
  15. RA-SIF36BD Belt Drive Square Inline Fan with 37.25" Centrifugal Wheel.
  16. RA-SIF36BDHP Belt Drive Square Inline Fan with High Pressure 37.25" Centrifugal Wheel.
Log in for parts
Feature Image