RAM-M
RAM-M
RAM-M
RAM-M
RAM-M
RAM-M

Horizontal Industrial Direct Fired Recirculating Heater

(RAM-M)

The Industrial Direct Fired Horizontal Recirculating Heater is designed to deliver make-up air for applications requiring high airflow gas heat requirements within a robust unit casing for variable fresh air to return air volumes. This model offers a factory mounted fresh air and return air damper that varies the amount of air bypassing the burner based on recirculating needs. Units utilize natural or propane gas with a nearly 100% efficient direct fired burner with indoor or outdoor installation options.

  • Air Volume: 7,000 – 70,000 cfm
  • Maximum SP: 3" wg. @ standard air density
Contact Sales Rep

Features

  1. G-90 galvanized construction
  2. Hinged, double wall service doors with flush-mount latches
  3. 80/20, 60/40, 50/50 fresh air to return air options
  4. Six discharge options
  5. Adjustable profile plates
  6. Wide-range, high capacity line burner with up to 30:1 turndown ratio
  7. Electric pilot spark ignition
  8. Burner economizer thermostat
  9. Burner observation port
  10. Electronic flame safety controls
  11. Airflow proving control
  12. Burner and blower service switches
  13. Standard heavy duty lifting lugs
  14. Fused disconnect
  15. Standard, high E, open drip proof with adjustable motor mount
  16. Motor starters
  17. Weatherproof control vestibule enclosure
  18. Terminal strip for quick service check
  19. Manifold built to required codes (FM/IRI/FIA)

Options

  1. Adjustable pitch motor sheave
  2. 1”, 1.5 lb. casing insulation, includes galvanized steel casing liner
  3. Extended grease lines
  4. Floor mounted spring isolators
  5. Hanging spring isolators, 1-inch
  6. Painted casings
  7. Pillow-block bearings, 100,000 hr (standard on all units with an industrial blower)
  8. Two speed damper package, includes dual airflow switches and rate limiting control
  9. Discharge damper, two position motor and interlock
  10. Discharge louvers with four way air diffuser
  11. Filter section with removable, hinged access door; includes 2-inch washable aluminum mesh filter or a 2-inch pleated filter, optional insulation
  12. Fresh air intake hood with birdscreen
  13. Full downturn inlet hood
  14. Inlet hood filters, 2-inch cleanable, aluminum mesh
  15. Inlet screen
  16. Inlet damper, two position motor and interlock
  17. Return air filter, 80/20 units; 2-inch deep aluminum mesh or 2-inch deep 30% efficient pleated type
  18. Standard curb, 24-inch or 14-inch, 12-gauge steel

Certifications

The RAM Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Model RAM is ETL Listed under file number 3013648-002 and complies with ANSI Z83.4-Second Edition and CSA 3.7-2006 Standards.

Resources

Models

  1. RAM-M 20 with 18" burner Horizontal Recirculating Industrial Heater with a 18" burner and a 20" blower.
  2. RAM-M 20 with 24" burner Horizontal Recirculating Industrial Heater with a 24" burner and a 20" blower.
  3. RAM-M 20 with 30" burner Horizontal Recirculating Industrial Heater with a 30" burner and a 20" blower.
  4. RAM-M 20 with 36" burner Horizontal Recirculating Industrial Heater with a 36" burner and a 20" blower.
  5. RAM-M 22 with 30" burner Horizontal Recirculating Industrial Heater with a 30" burner and a 22" blower.
  6. RAM-M 22 with 48" burner Horizontal Recirculating Industrial Heater with a 48" burner and a 22" blower.
  7. RAM-M 22 with 54" burner Horizontal Recirculating Industrial Heater with a 54" burner and a 22" blower.
  8. RAM-M 25 with 36" burner Horizontal Recirculating Industrial Heater with a 36" burner and a 25" blower.
  9. RAM-M 25 with 48" burner Horizontal Recirculating Industrial Heater with a 48" burner and a 25" blower.
  10. RAM-M 25 with 60" burner Horizontal Recirculating Industrial Heater with a 60" burner and a 25" blower.
  11. RAM-M 25 with 72" burner Horizontal Recirculating Industrial Heater with a 72" burner and a 25" blower.
  12. RAM-M 27 with 48" burner Horizontal Recirculating Industrial Heater with a 48" burner and a 27" blower.
  13. RAM-M 27 with 60" burner Horizontal Recirculating Industrial Heater with a 60" burner and a 27" blower.
  14. RAM-M 27 with 72" burner Horizontal Recirculating Industrial Heater with a 72" burner and a 27" blower.
  15. RAM-M 27 with 84" burner Horizontal Recirculating Industrial Heater with a 84" burner and a 27" blower.
  16. RAM-M 30 with 60" burner Horizontal Recirculating Industrial Heater with a 60" burner and a 30" blower.
  17. RAM-M 30 with 72" burner Horizontal Recirculating Industrial Heater with a 72" burner and a 30" blower.
  18. RAM-M 30 with 84" burner Horizontal Recirculating Industrial Heater with a 84" burner and a 30" blower.
  19. RAM-M 33 with 72" burner Horizontal Recirculating Industrial Heater with a 72" burner and a 33" blower.
  20. RAM-M 33 with 84" burner Horizontal Recirculating Industrial Heater with a 84" burner and a 33" blower.
  21. RAM-M 33 with 96" burner Horizontal Recirculating Industrial Heater with a 96" burner and a 33" blower.
  22. RAM-M 36 with 72" burner Horizontal Recirculating Industrial Heater with a 72" burner and a 36" blower.
  23. RAM-M 36 with 84" burner Horizontal Recirculating Industrial Heater with a 84" burner and a 36" blower.
Log in for parts
Feature Image