direct-fired-module

Direct Fired Module

Direct gas-fired heater module, for use in tempering make-up air. Direct fired modular heaters are designed for natural or propane gas applications. Heaters are rated for indoor or outdoor installations in commercial occupancies.

Self-adjusting burner profile plates allow for 2 speed and variable air volume applications. Plates ensure proper air velocity and pressure drop across the burner for clean combustion. The plates ensure proper air velocity and pressure drop across the burner for clean combustion. Spring loaded profile plates react to the momentum of the fresh air stream; therefore, no motors or actuators are needed to drive them. Nor do they need to be manually set to a specific position.

Read more
  • Air Volume: 1,000 – 21,000 cfm
  • Maximum SP: 2" wg. @ standard air density
Contact Sales Rep

Features

  1. G90 galvanized construction
  2. Easy access doors
  3. Lifting points
  4. Redundant gas values
  5. Pre-wired, pre-piped controls
  6. Horizontal or down discharge
  7. Fully insulated casing
  8. Stainless steel burner
  9. Intermittent spark pilot with timed safety lockout
  10. Electronic flame modulation
  11. High temperature limit switch
  12. Airflow proving switch
  13. Economizer inlet thermostat
  14. Burner observation port

Resources

Feature Image